In this DIY session we are going to use a 32×16 LED dot Matrix display module which is also known as P10 LED Display Module to display a scrolling text by using Arduino UNO. P10 modules can be cascaded to build any size of the advertising board.
check out the full project here: https://circuitdigest.com/microcontroller-projects/digital-notice-board-using-p10-led-matrix-display-and-arduino
For more EE projects, articles, news and resource, visit: https://circuitdigest.com
Here we are going to design a prototype for Automatic Bottle Filling Machine using Arduino Uno, conveyor belt, solenoid valve, IR sensor, and Stepper motor. Belt conveyor is driven by a stepper motor at a constant preset speed. The stepper motor will keep driving the belt until an IR sensor detects the presence of a bottle on the belt. We used the IR sensor as an external trigger. So whenever the IR sensor goes high it sends a trigger to Arduino to stop the motor and turn on the solenoid valve.
check out the full project here:
The basic idea of this Arduino Water Fountain is to take an input from any external sound source like mobile, iPod, PC etc., sample the sound and break it down to different voltage ranges, then use the output to turn on various Relay. We first used a condenser mic based sound sensor module to perform on the sound source to split the sounds into different voltage ranges. Then the voltage will be fed to op-amp to compare sound level with a particular limit. The higher voltage range will correspond to a relay switch ON which comprises a musical water fountain operating to the beats and rhythms of the song. So here we are building this Musical Fountain using Arduino and sound sensor.
Find here the full project: https://circuitdigest.com/microcontroller-projects/arduino-controlled-water-fountain-using-sound-sensor
Watch the project demonstration video here: https://www.youtube.com/watch?v=kEwq_YNiBbE